CruzPro GPS Pulse - Electronic Paddle Wheel Transducer
by Laurie Devitt on 11 Apr
CruzPro's latest intelligent sensor technology, the GPS Pulse electronic paddle wheel transducer.
CruzPro GPS Pulse .
The GPS Pulse is a simple to install replacement for the traditional speed sensor paddlewheel used on most boats.
If you have a boat then you will know of the frustration when your paddle wheel gets clogged, and fails to work. Pulling the transducer out or going in the water to clean it is a chore most boat owners have to do on regular bases.
The GPS Pulse removes the need for a paddle wheel altogether. It uses speed over the ground information and converts it into paddlewheel pulses. It can be used to directly replace most paddlewheel transducers.
Because you now have your true speed over the ground, rather than speed through the water you have a more accurate indication of your progress.
The GPS Pulse comes in a small simple to install package that connects directly to your existing boat speed display. It also outputs standard GPS information in NMEA 0183 format for connection to repeater displays, data loggers or charting software.
• Operating Voltage: 9.5 - 16.0 VDC
• Current Drain: 0.04 amps nominal
• Pulse Output: 22000 pulses per mile
• Data Output: NMEA 0183 serial 4800
• GPS data $GPRMC, $GPVTG, $GPGGA, $GPGSA, $GPGSV
How to Order
Available from your local CruzPro Dealer or email email@example.com
. Or call +64 (0)9 459-1922
. For more information visit website
If you want to link to this article then please use this URL: www.marinebusinessworld.com/152970