Please select your home edition
Edition
Vaikobi 2019 - Leaderboard 3

Vicem Yachts unveils all-mahogany made 65 IPS Classic

by Vicem Yachts 8 Nov 2018 09:17 PST 31 October - 4 November 2018
65 IPS Classic © Vicem Yachts

The all-new Vicem 65 IPS Classic, the Turkish-built yacht with classic Down East lines, has been on display at the Fort Lauderdale International Boat Show 2018 (October 31- November 4).

The 65 IPS Classic is Vicem's 153rd hull, and brings to bear everything the shipyard has become world renowned for in its 28 year history. This Vicem's the first in that size range to be fitted with the Volvo Penta IPS system.

The Vicem 65 IPS Classic is the latest offering from a brand that has distinguished itself from the very beginning for honoring the old traditions of both Turkish and American naval design, while infusing their creations with an amount of luxury and quality of fit and finish that remains unmatched in the classic yacht segment. That, coupled with a construction method that sets them ahead of the competition, is the reason why Vicem is so respected in the industry and desired among yachting enthusiasts.

Timeless classic elegance

The cockpit of the 65 IPS Classic has a large L-shaped sofa and a wet bar. The salon has an oversize L-shaped sofa to starboard and a large lounge chair, flanking an entertainment center, to port. The galley is up and forward to port, with lots of counter space for long-range cruising. The helm station to starboard has seats for two.

Creating extra interior volume

The new 65 IPS classic can be built with three or four staterooms and three heads. Below, the master stateroom is midships and full beam, with a walkaround bed and a large ensuite head with shower (7'5'' feet of head-room). The VIP cabin is forward with a walkaround bed and en suite head and shower; the third stateroom with two berths is on the starboard side, also with a head and shower. The 65 IPS Classic on display at FLIBS 2018 was a four cabin version and has an average of seven feet of headroom.

The exquisite wood work in the interiors is complimented by the latest in equipment and electronics, and a design that focuses on open spaces, storage aplenty and absolute comfort.

Sinan Unal - Vicem's Chief Naval Architect and Marine Engineer - says: "Our fully custom construction process allows us to build a yacht that is not hampered by the constraints of a molded hull, therefore, it was our goal to build a 65 footer with the internal volume of a typical 75 to 80 ft express cruiser. Vicem has always offered increased living space compared to the competition, but we made it a point to go beyond even our own standards. One thing that invariably leads to discomfort on a boat is headroom. Even with a wide beam and lots of windows, if the ceiling is just a few inches above the head, people will start feeling claustrophobic very soon. On this yacht, we have 7 ft of headroom average throughout, with the course, with all that additional volume come more closets and storage everywhere. We challenged our engineers to achieve this unrivaled space without altering the classic proportions of our exterior, so this yacht's look is classic Vicem, sleek, elegant and uncluttered".

Powered by twin 800-hp Volvo Pentadiesels with IPS 1050 pod drives, the new Vicem 65 IPS Classic cruises at 23 knots – with a range of about 420 nm - and tops out at 26 knots. Furthermore, the yard offers two other Volvo Penta engine options: 2xIPS 1200 or 2xIPS 1350.

The cold molded method

The building technique used to create the Vicem 65 IPS Classic is the cold molded process, west system epoxy. A millenary, unique construction technique which embodies all the construction methods of the Turkish historical marine tradition; the cold molded process west system epoxy a modern procedure different from traditional boat building. Based on engineered wood construction,cold-molding uses laminated mahogany (coming from managed forests) and a specific formulated epoxy resin to create the hull, decks and principal superstructures. On a strength-to-weight ratio, mahogany is stronger than fiberglass.

Noelle Semmes, sales director of Vicem Yachts USA, refers: "Vicem's proprietary construction produces a hull that mixes the best of synthetic materials and natural ones in a completely hand made way, which ensures utmost quality throughout. Like all high end brands, we use high tech fibers like e-glass and carbon fiber to reinforce all stress points and encapsulate the inner and outer layers of the hull, but inside the hull itself, instead of more fiberglass or foam like production boats, we use a mahogany and epoxy laminate that is far superior. Why use wood as the inner layer? Because it is much better. On a weigh-to-strength ratio, mahogany is much stronger than fiberglass, while drastically reducing sound and temperature levels. And because this construction uses a lot less epoxy, our hull is much lighter and not as stiff as a fiberglass one, which means we do not pound and rebound over the waves but rather, glide right through them. If you've never been out on a Vicem, you are in for the revelation of your life. A much gentler ride, on a hull that is virtually silent and much cooler in summer, or warmer in winter, than a plastic fiberglass boat. And of course, because of the reduced weight and better sea keeping, we need smaller engines, which results in better fuel consumption".

Related Articles

Additional review of offshore wind projects
BoatUS: What makes saltwater vs. freshwater offshore wind farms different? A recent move by the federal government to expand the environmental review of the first major offshore wind farm in the U.S., Vineyard Wind, and the “cumulative impact” of offshore wind projects off the Atlantic Coast has left some in the Great Lakes Posted today at 1:44 pm
RIMTA wraps-up Youth Summer Boatbuilding Programs
Overwhelming success for the Rhode Island Marine Trades Association The Rhode Island Marine Trades Association (RIMTA) announced today the overwhelming success of its Youth Summer Boatbuilding Programs. The four programs ran concurrently in Newport, Westerly, Bristol and North Providence. Posted on 23 Aug
BoatUS offers updated Hurricane Preparation Guide
Who else wants to protect their boat from hurricane damage? If you want to know how to best protect recreational boats from damage in a hurricane, ask the experts who've been tasked with cleaning up the mess for nearly 40 years. Posted on 22 Aug
Newport International Boat Show information
Logistics and travel information for those planning on attending the show Newport Exhibition Group, owners and producers of the Newport International Boat Show (NIBS), announced today show information for those planning on attending the 49th annual Show September 12-15, 2019. Posted on 21 Aug
Logistics and travel info announced for NIBS 2019
49th Newport International Boat Show starts 12th September One of the largest in-water shows in the country, and the kick-off to the boat show season, NIBS will host exhibitors from around the world with an exceptional assortment of boats of every type and style. Posted on 20 Aug
Maritimo set for Fort Lauderdale
Three premiere releases will be on display at Fort Lauderdale International Boat Show The upcoming Fort Lauderdale International Boat Show will see the Americas' premiere of the latest revolutionary sport coupe and two remodeled enclosed flybridge motor yachts released from Australia's leading luxury motor yacht manufacturer Maritimo. Posted on 19 Aug
Evinrude hosts Representative Bryan Steil
Representative Bryan Steil at Wisconsin Facility Congressman Bryan Steil (R-WI-01) visited Evinrude Outboard Motors world headquarters in Sturtevant, Wisconsin last week. Steil met with the company's leadership team, toured the engine manufacturing plant and engineering facility Posted on 19 Aug
Datrex new Trident 150 USCG Type II Lifejacket
Datrex continued commitment to offer you more choices DATREX has now expanded its lifejacket product line to include our own U.S.C.G. Type II inflatable PFD. Our initial inflatable lifejacket is the dual chamber Trident 275N SOLAS/MED Approved, but now we are proud to introduce you to our latest addition. Posted on 19 Aug
IBEX 2019 Networking events not to miss
Opportunities to connect with marine industry professionals The International BoatBuilders' Exhibition and Conference (IBEX) announced today that during the Show held October 1-3 at the Tampa Convention Center, it will offer visitors the chance to participate in a number of social and entertainment special events Posted on 18 Aug
Forecast on US Boat Building Production, June 2022
Production is expected to be on par with levels seen in spring 2019 In the latest Forecast on U.S. Boat Building Production from ITR Economics, growth in boat building production is expected to decline slightly throughout 2020 and rebound strongly in 2021. Posted on 16 Aug
Vaikobi 2019 - Footer 1Melges IC37 2019 FooterAllen Brothers MBW 660 Purchase Power