Please select your home edition
Edition
North Sails Loft 57 Podcast

Adapting a boat and racing techniques for sailors with a disability - the Challenger class

by Magnus Smith 27 Jan 2024 04:00 PST
Alex Hovden in his Challenger © Andy Foulsham

We spoke to Alex Hovden, who sails a Challenger trimaran, about how he feels this is the right class for him, and what modifications he has made to the boat, and to his technique, to be more competitive and get more enjoyment from sailing.

The single-handed Challenger is a very stable boat which, perhaps surprisingly, does not sacrifice any speed to achieve that stability/safety. It has a PY of 1173 putting it on par with the Firefly and ILCA 6 (Laser Radial). The helm stays in a front-facing seat within the centre hull, and this means sailors of all ages and physical abilities can race competitively against one another. There is no hiking out!

Adapting the boat to suit the sailor

After many years' hard work as a Chartered Accountant Alex can afford two Challengers; one is kept ready to race at Rutland SC, and the other is on a road trailer at home, ready to leave. In this way he can do all the open meetings on the circuit, but still turn up for club racing with the minimum hassle. With the aid of his family's DIY skills, both boats are set up exactly the same, so whichever one he uses, it feels familiar.

One of the main factors which dictates how Alex sets up his control lines is his right arm, of which he says, "it misbehaves a bit". His left arm is also stronger, so the kicker, downhaul, outhaul and centreboard control lines are all led down the left side of the boat. The mainsheet goes through a Spinlock jammer also on the port gunwhale.

Compare Alex's port side control lines (above) with the more standard Challenger (below) which uses both sides, and has a central mainsheet jammer.

Alex has deliberately chosen to have a fixed seat, rather than an adjustable one. He says the tracks upon which the latter runs on raises him up too much; he prefers to be slightly lower down. This also means he can wedge his leg under the crossbeam and feel more secure.

Other sailors find they can get into the boat more easily with the seat slid right back, and then bring it forward to sail.

One-handed sailing

The most difficult manoeuvre for Alex is a leeward mark rounding in a pack, trying to sheet in and steer at the same time as worrying about overlaps. Anticipating the situation before you get stuck in it is crucial! Alex accepts that letting others go first, but getting a better, tighter rounding himself, means he doesn't really lose out.

The windward mark in comparison is easier; with the mainsheet and tiller in one hand you can let the rope slip through your fingers in a controlled manner. Actually letting go of the tiller isn't too bad - you have a few seconds grace in the Challenger - but a better option is to jam the large metal loop at the end of the tiller over your knee, to maintain a little control.

He has been working with a personal trainer to improve his upper body strength, which will hopefully help him be competitive in 2024.

Capsizing and other dangers

Falling out of the boat is rare; Alex suggests it might happen once every 5 years. He described one such event at Oxford SC where a very gusty wind caught him out. On the beat, just about the hit the lay line, when a gust hit which he wasn't able to respond to in time. Out he fell, and the boat didn't capsize, but sat back down and rounded up. The rescue team were quick to respond. Alex had a drysuit on, so felt comfortable, and wasn't worried in the water. He has since got a loose seatbelt, just for peace of mind.

Alex feels it is important to pay attention to the conditions before launching, before there's a problem, so as to avoid 'pushing it' and risking getting near a capsize. It requires two RIBs to un-invert a Challenger, which means his race would be over anyway. What is nice about the fleet is the lack of bravado, he reports. There is no judgement if you call it a day; the sailors will often congratulate each other on the bravery of making that decision.

During a Challenger-only open meeting, the fleet will vote whether or not to race, which is another pragmatic example of solidarity.

Alex's sailing career

As a teenager in the Scouts Alex had a tester session in a Hansa dinghy (back then the class was called the Access). The instructor commented that he was a natural sailor, and it wasn't long before Alex was bitten by the bug. He was able to join his nearest club, Papercourt SC, and sail a Hansa there, upgrading to the Hansa Liberty (a larger hull with a more complex rig). After a year he moved to Queen Mary SC and tried the Challenger.

After a few top ten race wins at the World Championships in Portugal, Alex was asked to race the SKUD 18 (used in the Paralympics at the time) and in this two-man class he ran a successful campaign, won the Europeans and came second at the Olympic Week in Hyères.

When sailing was dropped from the Paralympics Alex was prompted to reconsider the SKUD 18. There was the issue of finding the right crew, and it was very labour intensive to rig; Alex's wheelchair is so low down he cannot even get involved at all! Whereas with a Challenger he can stay in charge and just get one person to help him at times.

He describes himself very much as a competitive sailor, focussed on speed, even wanting to be first to leave the shore so he can practice the course (especially those leeward mark roundings, as mentioned earlier).

He also enjoys virtual sailing, and feels that this focus on tactics has really helped him improve in this area. Going to the gym is a second thing that has been helpful on the water.

The class

Alex reassures everyone that the Challenger fleet is welcoming to new members. Whatever your age or ability, it could be great for your racing!

Class association: www.challenger-sailing.org.uk
Latest race reports and photos: www.yachtsandyachting.com/class/Challenger

Related Articles

Letter aims to reduce harm to U.S. Manufacturing
A summary of news relevant to marine businesses across North America NMMA joined 29 leading industry associations in a letter to U.S. Commerce Secretary Howard Lutnick advocating for revisions to the Department of Commerce's implementation of Section 232 tariffs on steel, aluminum and related derivative products. Posted on 2 Jul
Despite world politics industry remains resolute
A summary of news relevant to marine businesses across North America As part of NMMA's continued advocacy efforts following the 2025 American Boating Congress (ABC), a group of NMMA leaders visited Capitol Hill last week to meet with Congressman Mike Collins (GA-10). Posted on 25 Jun
Major industry event updates in the USA and Europe
A summary of news relevant to marine businesses across North America The International BoatBuilders' Exhibition and Conference (IBEX), North America's premier technical trade event for the recreational marine industry announced today that registration for visitors is now open for this year's Show. Posted on 18 Jun
Maritimo M50 Flybridge & S60 Sedan Video
We speak to Maritimo's Neil McCabe & Phil Candler We talked to Neil McCabe, Maritimo's Design Office Manager, and Phil Candler, Maritimo's General Manager Operations, to find out more about the M50 Flybridge and S60 Sedan during the Sanctuary Cove International Boat Show. Posted on 17 Jun
Room for industry optimism for the rest of 2025
A summary of news relevant to marine businesses across North America Despite varying economic factors across all states, the latest data from NMMA's Monthly Recreational Boating Industry Data Summary report offers a tempered view of the recreational boating market. Posted on 11 Jun
More confusion as tariff decisions overruled
A summary of news relevant to marine businesses across North America On May 30, President Donald Trump announced that Section 232 tariffs on imported steel and aluminum will double from 25% to 50%, effective Wednesday, June 4. The announcement was made during a speech at U.S. Steel's Mon Valley Works-Irvin Plant. Posted on 4 Jun
Event updates, new products and more
A summary of news relevant to marine businesses across North America The 2025 American Boating Congress (ABC) concluded last week in the nation's capital, bringing together marine industry leaders and policymakers for high-level discussions on the future of recreational boating and marine manufacturing. Posted on 28 May
Trade war continues but progress being made
A summary of news relevant to marine businesses across North America Following talks over the weekend in Geneva, Switzerland, the U.S. and China agreed to a 90-day pause on the ongoing trade war between both countries. Posted on 14 May
American Sportfishing Association urges action
A summary of news relevant to marine businesses across North America ASA President Glenn Hughes sent a letter to Trump Administration expressing support for its efforts to address global trade imbalances and strengthen U.S. competitiveness, while urging swift action to provide greater certainty and relief for ASA members. Posted on 7 May
Tariff rates under further consideration
A summary of news relevant to marine businesses across North America According to an April 23 Wall Street Journal report, President Trump is considering reducing the tariff rate on Chinese imports to 50-65%. Posted on 30 Apr
Maritimo S SeriesAllen Dynamic 40 FooterCyclops Marine 2023 November - FOOTER